Disaster Area Designs

DISASTER AREA DESIGNS TRS to Midi Cable


Custom-made 3ft. 1/4″ right angle TRS to 5-pin DIN MIDI cable. - MJ-5P

Connect the SMARTClock MultiJack or the DMC-3XL Gen2 / DMC-4 Gen2 Expression Input to standard MIDI devices.

Directions for use:

SMARTClock:

Connect the TRS plug to the MultiJack.

Enter Setup mode on the SMARTClock by holding the encoder knob at power-on.

Navigate to the JACK settings and tap the encoder knob to set.

Set the JACK setting to either MIDI (sends all MIDI messages to the MultiJack) or nCLK (sends all MIDI messages except MIDI Clock to the MultiJack.)

Tap the encoder knob to exit.

Hold the encoder knob to save.

DMC-3XL Gen2 / DMC-4 Gen2:

Connect the TRS plug to the Expression Pedal input.

Enter Setup mode by holding the mode button at power on (center button for DMC-3XL, upper-right for DMC-4.)

Tap the left button until “E” is displayed on the left side of the screen.

Tap the right button until “MID” is displayed on the right side of the screen.

Hold the mode button (center button for DMC-3XL, upper-right for DMC-4.)