Each rack mount is 2mm powder coated steel, lunchbox rack conversion plate, supplied with:
- 14 x M4x10 Posi Pan Black
- 4 x M4x10 Shakeproof Washers
- 4 x M4x10 Flat Washers
- 4 x Cage Nuts
- 4 x M6x12 Posi Pan Black
- 4 x M6 Plastic Cup Washers
Remove the cage and amp feet; place the amp section on the rackmount, put the cage back on and fit the whole assembly together using the new bolts etc. The rubber feet can be re-attached through the rackmount, which has suitable holes, or just left off.
As the amp is 160mm high (3.6U) we recommend a 5U space for the amp, this gives it 1.4U free space above it for cooling. However, if the ambient temperature is very high, and the front and back do not have adequate ventilation, more space above may be needed.