Two Notes Audio Engineering, creator of the world’s best speaker cabinet simulation, has bridged a new technological gap with the Torpedo Reload, your new high-end device for silent playing and reamplification.
The Reload is the ideal combination of the devices you must have in a modern studio for the recording of electric guitars and basses: a power attenuator, a multi-impedance loadbox, a DI and re-amping box – it does it all and does it perfectly too.
The Two Notes philosophy stands in one word, transparency. The tone must come from your guitar, your amp and cabinet – not from the electronics that we put between parts of your regular setup.
RE-ACTTM: Reactive-Active Attenuator
Attenuators are usually known for the negative impact they have on your tone in cases of heavy attenuation. On the contrary, the Reactive-Active technology presents your amplifier with a consistent speaker’s impedance no matter what level of attenuation you’re at, and thus preserves the specific character of your amplifier. With a choice of 4, 8, or 16 Ohms, your amplifier (up to 150W RMS) will actually see real speaker impedance, and your tone will remain constant throughout the continuous attenuation curve.
Transparency is the key.
The result of years of research, the RE-ACTTM technology (Reactive-Active Attenuator) will tame your amplifier without ever betraying it.
From 0dB attenuation to total silencing, you can nonetheless choose between absolute transparency to more vintage or modern tone coloring with the CONTOUR.
Plug your guitar into the DI Input and send this signal to your recorder. Later on, you can re-send that signal to your amplifier by using re-amping techniques with the Reload‘s REPLAYTMfunction. To make it perfect, Two Notes has developed the unique MATCHTM function – THE solution to the problem of level adjustment when re-amplifying.
One Device to Rule Them All?
Record your guitar using the DI, send the signal back to your amp using the REPLAYTM, drive your amp the way it should be driven and lower the level or simply make it silent with RE-ACTTM, record the signal from the loadbox, and even use your own microphone and cabinet for a 3rd take – all simultaneously!
The Torpedo Reload comes with the Wall of Sound III plug-in and your first 24 speaker cabinets: in conjunction with the Torpedo Reload and your beloved guitar or bass amplifier, the WoS III plug-in will achieve absolutely true-to-life studio miking of your amp.
Choose the cabinet and microphone; place the mic in your virtual studio to find the “sweet spot”, and enjoy all of the Torpedo features, including power-amp simulation, 3rd-party IR compatibility, and the possibility of mixing up to 100 different cabs within a single plug-in instance.
4-, 8-, 16-Ohm, real speaker impedance
Unlike other attenuators that may “show” your amplifier a higher impedance and thereby crush its tone, the Reload offers constant loadbox impedance which is similar to a speaker’s, and which is low enough to drive the speaker in the most respectful way possible. The tone picked up by the loadbox is therefore transmitted to the speaker without any modification.
Admissible power: 150W RMS, 200W peak.
Inputs / Outputs
Inputs can handle both balanced and unbalanced signals.
DI and Loadbox Outputs are electronically balanced using low-noise, low-distortion circuits so your tone will never be affected by any kind of unwanted artifacts. They are also protected against 48V Phantom power, in case you forget to switch it off on the mixer.
The REPLAYTM Output follows a low-impedance unbalanced design to ensure the best conditions when sending the signal to the amplifier.
The ground lifts will allow you to solve any and all grounding issues that may come up when you are setting up the kind of complex wiring you can use with the Reload.
The Two Notes active security system that you find in all the Two Notes product is there to protect both the player and the amplifier plugged to the Torpedo Reload against any kind of overheating and inappropriate impedance matching.
Sturdy & reliable
We use the best aluminum and steel for the utmost protection of the Reload‘s precious electronics.
It’s heavy, built to last — it will survive any studio session or stage stress.
Dimensions & weight
Width x depth x height : 304 x 184 x 89 (mm) / 12 x 7.2 x 3.5 (in)
4 kg (8.8 lb)
High-quality electronic design
The best simulation is nothing without a perfectly designed analog and digital circuit. Two Notes focuses on the whole signal chain, from your amp or preamp output to the PA, monitor, headphones, or recorder to guarantee the best performance. Guitar and bass players deserve studio-quality gear!
Many parameters influence the sound of your guitar or bass rig when it comes to recording. Carefully selecting your cabinet and miking options will dramatically improve the sound of your takes. The Torpedo simulation reproduces the tiniest variations of a cabinet’s behavior such as frequency response and distortion (*). Move the microphone in the virtual studio room thanks to the Torpedo IR synthesis, control the phase with the Variphi (*) — all the settings you need to achieve great recordings are here.
(*) VB-101, VM-202 and WoS plug-in only