This harmonic tremolo gives you a huge range of tonal possibilities. It can be used as a standalone tremolo, optionally with with some layered on reverb, or you can dial in some complex textured delays and feedback to create dreamy soundscapes. And of course you have everything inbetween.
Sweeping range of the tremolo (on bottom 2 OUTER SPACE settings) or Spacing between echoes (on upper OUTER SPACE setting)
VELOCITY
Speed of tremolo sweep
EXPANSE
Amount of atmospheric ambience
VASTNESS (Unlabeled upper-right knob)
Amount of space added when pressing the VAST EXPANSE foot switch (Interactive with EXPANSE. e.g. Higher EXPANSE settings make this more responsive. Experiment to get a feel for it)
VOLUME
Overall effect level. Gives up to 2x boost to compensate for the perceived drop in volume from tremolo
BLEND
Mixes dry and wet signals
OUTER SPACE
Sets the mode of the pedal:
DOWN: Harmonic tremolo only. EXPANSE is disabled
MID: Adds expansive reverb
UP: Adds echoing feedback
WARP
Selects between different voices:
DOWN: Sensible and beautiful harmonic tremolo
MID: Slightly more severe, with different frequencies on the high and low pass filters, and more resonance
UP: The low frequency oscillator (LFO) not only pans between the filters, but also shifts their frequencies. The WIDTHknob has a much bigger impact on the sound than in other WARP settings as it also shifts the resonance
VAST EXPANSE (foot switch)
Temporarily pushes the EXPANSE beyond EXPANSE its limits. Its added amount is controlled by VASTNESS
BYPASS (foot switch)
Tap to toggle between engaged and bypassed (true bypass). Hold to temporarily toggle, the release to switch back
Internal Trimmers
An internal trimmer sets the ceiling of the EXPANSE knob. Another sets the LED brightness, which can reduce power consumption if needed.
Technical Specifications
Power supply
9V DC, 2.1mm center negative (not included). No internal battery clip.
Power consumption
70mA to 110mA depending on LED brightness, set with an internal trimmer. By default it's around 100mA and you can safely plug it into a 100mA port on a multi-port power supply.
Bypass
True bypass, relay controlled with a soft-touch switch. Hold to temporarily engage/bypass.