GUITARS

AMPLIFIERS

PEDALS & FX

SEYMOUR DUNCAN PICKUPS

STRINGS & ACCESSORIES


T-Rex Engineering

T-Rex
Fuel Tank Classic

T-Rex Fuel Tank Classic

WAS: $340
NOW: $306

Finally, a T-Rex power supply for effect users. No more batteries to change. No more tangled cables to trip over. FuelTank is the perfect power supply unit for guitarists who want to focus on their performance, not their gear. Delivering 1.500 mA through ten DC plugs, FuelTank powers all your pedals – keeping you running on full power night after night.

With a compact design, FuelTank fits conveniently every pedalboard including the T-Rex ToneTrunk effect board. And it comes with all the cables you need to get you up and running. The dimensions of the FuelTank are:L:15,8 cm H:3,8 cm W:7,6 cm. FuelTank delivers 1.500 mA of reliable power. Two of the ten outputs provide 12-volt power with isolated ground – one DC and the other AC, for AC pedals.

Features:

  • MAINS input power plug, 3-pin standard plug
  • Voltage selector, 115/230 volts
  • eight 9-volt DC output plugs, all sharing the same ground. Giving a total of 500 mA
  • one 12-volt DC output with isolated ground, giving 500 mA
  • one 12-volt AC output with isolated ground, giving 500 mA
  • 18 black extension cables in two lengths (25cm and 50cm) for the DC outputs
  • 2 red extension cables for the 12-volt AC output
  • 1 standard mains power cable (like the one you use for your computer)
  • Blue LED when unit is ON

FAQ:

  1. Can the FuelTank run all T-Rex pedals?
    Yes. Use the 12 volt DC output for the Room-Mate and the 12 volt AC output for the Replica. The rest of the pedals can be driven by the 9 volt outputs.
  2. Does the FuelTank have isolated outputs?
    The FuelTank consists of 3 isolated blocks - 9V DC, 12V AC & 12V DC. The eight 9V DC outputs all share the same ground, which means that they are not isolated.
  3. Is each output short-circuit protected?
    Yes.
  4. Can the FuelTank power other pedals than T-Rex pedals?
    Yes, the FuelTank powers all pedals that need 9V DC and 12 V AC or 12V DC. It can NOT power an 18V pedal. As each block of outputs gives a total of 500mA, the FuelTank cannot power pedals which need more than 500 mA.
  5. Are there any products that do not work with the FuelTank?
    Yes, the Mojo Vibe: it uses an internal step-up circuit where 9V is altered to 18V - this causes a horrible noise on the ground. We suggest that the Mojo Vibe gets its own power supply. We've also discovered that Lehle products need separate outputs (either 12V DC / 12V AC)in order to work with the FuelTank.

Go Back