Products

GUITARS

AMPLIFIERS

PEDALS & FX (by Category)

PEDALS & FX (by Brand)

PICKUPS

STRINGS & ACCESSORIES


Roger Mayer Pedals

Roger Mayer
Voodoo 1

Roger Mayer Voodoo 1 $399.00

Category: Distortion

The Voodoo-1 distortion section uses a unique combination of the best discrete and IC design techniques to emulate the type of distortion found on many classic tube amplifiers. It allows the player to create a wide range of distortion effects from mild to extreme whilst reacting to the most subtle nuances in touch and playing. The Voodoo-1 is now housed in our new box and features both Hard Wire and Dual Buffered Outputs plus easy battery access.

The Voodoo-1 has been designed and optimised to suit a wide range of pickups. It is the best choice for humbucking pickups and produces bright clear tone colours that will make solos stand out without sounding too thin. Using single coil pickups and 4 x 12 cabinets gives the addition body with bite that is necessary to cut through. The Voodoo-1, of course is equally happy with combos at low volume and make these small amps sound like big stacks. The distortion produced feels particularly tube like in operation and the Voodoo-1 slips into distortion with silky smoothness and compression characteristics usually only associated with vintage classic tube amplifiers The volume control of the guitar is very effective in controlling the amount of distortion and the guitar cleans up to it's original tone very easily. The Tone control is of advanced design and has been optimised to compliment various pickup types. The Gain control enables the unit to be used as a power booster without distortion up to full maxed out grunge grooviness. The Output control sets the amount of boost required.

Electronically the Voodoo-1 shares all the same basic Voodoo Series features with dual output buffering or hard wire output etc. The distortion section uses a unique combination of the best discrete and IC design techniques to emulate the type of distortion found on many classic tube amplifiers. It allows the player to create a wide range of distortion effects from mild to extreme whilst reacting to the most subtle nuances in touch and playing.

EXTERNAL POWER ADAPTER / SUPPLY : An external AC adapter (not supplied) can be used and access is through a standard DC power jack ( 2.1mm centre pin ) situated next to the jack sockets. Internal onboard filtering ensures that optimum low noise performance is maintained and diode protection provides peace of mind in case of polarity setting mistakes. Connection protocol:It uses the standard negative centre pin connection protocol used by many leading manufacturers. Specifications: 9 volt DC. Regulated output is recommended. Current rating: 50mA or more.

Go Back